Grandway FHP2P01 Power Meter PON

Grandway FHP2P01 Power meter PON 

This pon tester support measuring 1310nm upstream burst signal and 1490/1550nm downstream signal

Support EPON/GPON network

900 data storage function

With Pass, Warning, Fail mode

Intelligent charging and auto power off

Kuituhitsauskone INNO Instrument M7

Kuituhitsauskone INNO Instrument M7 on Inno Instrumentin uuden malliston pieni kuidun ulkokuoren mukaan kohdistava (cladding alignment) optisten kuitujen hitsauslaite. M7:n reilun kokoinen kosketusnäyttö sekä selkeisiin graafisiin kuvakkeisiin perustuva käyttöliittymä tarjoavat laadukkaan käyttökokemuksen myös kokemattomille käyttäjille.

Yksittäisen kuidun hitsausaika on 12 sekuntia. Jatkossuojan tyypillinen lämmitysaika on 20 sekuntia (40 mm jatkossuoja). Laitteen vakiokokoonpanoon sisältyy akku (3000 mAh), jolla suoritetaan täydellä latauksella n. 110 hitsausta ja jatkossuojan kutistusta. Laitteessa on kaksi kirkasta LED-valoa, jotka tekevät kuitujen asettamisesta koneeseen helppoa myös hämärissäkin olosuhteissa. Laite tallentaa 10000 viimeisintä hitsaustulosta muistiinsa.

Laite soveltuu käytettäväksi yleisimmillä kuitutyypeillä: SM (ITU-T G.652&G.657) / MM (ITU-T G.651) / DS (ITU-T G.653) / NZDS (ITU-T G.655). Katkaisupituus 10-16 mm.

Kuituhitsauskone INNO Instrument M7 on erityisen pienikokoinen ja kevyt: Laitteen mitat ovat 124 x 144 x 131 mm ja paino akkuineen 1,56 kg.

Peruskokoonpanoon kuuluvat seuraavat osat:
– Akku
– Hitsauslaite M7
– Kuituleikkuri V11 (myös muita leikkurityyppejä saatava)
– Jäähdytysteline
– Vaihtohitsauselektrodi E-50
– Lataus- ja verkkolaite
– Kantolaukku
– Kuorintapihdit ja puhdistusaineen pullo

Katso myös malli M9, joka on ytimen mukaan kohdistava rinnakkaismalli: http://vesala.fi/product/inno-instrument-m9/

Sähkönumero 64 745 06.

Lisätietoja valmistajan sivuilta https://www.innoinstrument.com/eng/m7-2/

Argus 42Plus

Argus 42Plus – ADSL Combi Tester

(replacing AP32) We have regrettably discontinued production for Test Telephone AP32. Now we have found a replacement from Germany.  Argus 42plus has been developed to test ASDL and ISDN protocoll. Installations are eazy to check with Argus 42Plus combi testers.

Argus 42Plus is used to ADSL, ISDN and Voip -testing. Unit has reasonable price and can be used to ADSL testing and with some additional accessories it can be used to ISDN- and POTS testing. ADSL combi tester at a fair price: the ARGUS®42 PLUS tests ADSL, as well as optionally ISDN and POTS. In addition to the various access types and protocols, the tester also determines e.g. the attainable transmission speed or noise floor of the line.

Upgrade to a full voice tester

Basic Triple Play tests are also supported: the ARGUS®42 PLUS can be upgraded to a fully featured voice tester if desired. The combination tester can then be used to set up voice calls to test and evaluate not only POTS and ISDN connections, but also calls placed via VoIP. The ARGUS®42 PLUS evaluates the voice quality, delivers a MOS value (using E model) and determines the Media Delivery Index (MDI) of IPTV streams.

Determine the line quality

The testing set also checks the resistance and capacitance and performs voltage measurements on top. Optionally, HF signals can be detected or data services can be tested, e.g. by enabling the passive bridge or router modes. This allows determining the transmission quality of the line.

Easy operation

The handheld tester, which weighs just 450 g, is remarkably userfriendly thanks to its intuitive menu structure.

Technichal Features:

• Power supply: supplied by standard rechargeable batteries
(type AA), NiMH battery pack or mains adaptor
• Hotkeys for quick start of various testes
• Power Management, user configurable
• Keypad: 16-keys, 2 cursor keys, 3 context-specific softkeys
• LC display with switchable background lighting
• 5 LEDs to indicate status
• Handset with integrated speaker and microphone
• CE marked: complies with CE directives
• User safety: fulfills EN 60950-1:2006-11
• RoHS conformance accoring to WEEE directive

Interfaces:

• RJ-45 line input for POTS, ADSL, ISDN
• RJ-11 serial interface to PC
• Ethernet (10/100 Base-T)
• Headset jack (TRS 2.5mm, approx. 3/32″)

Environmental conditions:

• Operating temperature: 0 °C (32 °F) up to +50 °C (122 °F)
• Storing temperature: -20 °C (-4 °F) up to +60 °C (140 °F)
• Relative humidity: up to 95%, non-condensing

Dimensions:

• Size: H x B x T: 229 x 72 x 35 mm (9.02 x 2,84 x 1,38 in)
• Weight: approx. 425 g (0.94 lbs)

Standard package:

ARGUS®42 PLUS with standard rechargeable batteries, mains adaptor, ADSL interface (Annex A+M or Annex B), RC measurement, xDSL test lead and adaptor, WINplus PC software, printed English manual, carrying case and rubber holster

 

Fusion Splicer INNO Instrument View 8 Pro

Additional information: https://www.innoinstrument.com/eng/view8-pro/

Fusion Splicer VIEW5 Pro

Fiber Cleaver Inno Instrument V10 Pro

Easy to use, simple up-and-down movement

Fiber Cleaver Inno Instrument V10 Pro is the most advanced fiber cleaver from Inno Instrument. Cleaver comes in a dedicated carrying pouch to keep the unit safe and the cut fiber scrap out of the splicer carrying case. With the unit, there are maintenance instructions (in English), brush for cleaning and an allen key.

Operation is basically 2 staged. First the lid is released from the storage lock. User inputs the fiber and presses down the lid. This will cut the fiber, rotate the blade into the next position and collect the cut off fiber scarp into the collector. After the press, unit automatically returns to the initial stage for the next fiber cleave.

The automatic mechanism of Fiber Cleaver Inno Instrument V10 Pro rotates the cutting blade on each use of the unit. One blade will normally produce approx. 60 000 cleaves once it should be replaced. Blade can be replaced by the user. Instructions are included in the container pouch. The battery powered, automated counter will follow the cleave count during the unit operation.

Fiber scrap safely into the scrap collector

Unit has an automated scrap collector that operates simulateously with the cleaving process. This mechanism will collect the potentially dangerous scrap pieces and secure them into the scrap contained, positioned in the side of the unit. Please note: user should empty this container after each usage, into a separate container with lockable lid. Fiber cut-off pieces can cause a long term hazard if not handled properly. Please make sure the user is aware of the correct, safe procedure prior to use.

Please ask our professionals for advice on how to handle the fiber properly before the first use.

Protective grease inside cables causing trouble

The protective grease that is being used commonly in direct buried cables, is the cause of most maintenance visits for fiber cleaving and splicing tools.This grease should be removed with a proper solvent; not only using IPA (isopropyl alcohol), which in turn is suitable for cleaning the fibers for splicing after cleaving.

This protective grease forms a small layer on top of the coating and will be transferred on the v-grooves of both cleaver and splicer. Eventually, this layer of coating will accumulate and will lower tha accuracy of the splicer alignment procedure. Removing this grease layer with a proper solvent, has a great impact on maintenance frequency of splicers an cleavers.

For grease removal, we recommend using:

• TL 3 Industrial solvent (by Solmaster), https://www.solmaster.fi/tuotteet/tl-3-teollisuusliuotin/

Default model for PRO-model splicers, option for others

Fiber Cleaver Inno Instrument V10 Pro is included by default in these packages:

• Inno Instrument View 5 Pro

Fiber Cleaver Inno Instrument V10 Pro can be chosen as an option for these models as well:

• Inno Instrument M7
• Inno Instrument M9
• Inno Instrument View 6S

Additional information from Inno Instrument website: https://www.innoinstrument.com/eng/v10-pro/

Maintenance and warranty for this product is handled in our office in Nummela, Vihti Finland.

Fiber Cleaver Inno Instrument V11

Fiber Cleaver Inno Instrument V11 – Easy to use, simple up-and-down movement (Not Manufactured anymore)

Fiber cleaver Inno Instrument V11 is a preceise fiber cleaver for cleaving traditional 125 um fiber (both singe fiber and ribbon fiber applications). V11 includes a scrap collector mechanism and a container for collecting fiber cut-offs safely. Cleaver rotates its blade after each cleave and you can cleave approx. 48 000 fibers with a single blade. Blade can be changed by the operator. Cleaver has an internal counter to keep count of cleaves performed.

Fiber cleaver Inno Instrument V11 operation is 2-staged. First you open the lid and insert fiber. Then, you simply press down the lid which will launch the cleaver blade rig to make the cleave. Finally, open up the lid all the way up, which will activate re-initialize the cleaver for next cleave.

Fiber scrap safely into the scrap collector

Unit has an automated scrap collector that operates simulateously with the cleaving process. This mechanism will collect the potentially dangerous scrap pieces and secure them into the scrap contained, positioned in the side of the unit. Please note: user should empty this container after each usage, into a separate container with lockable lid. Fiber cut-off pieces can cause a long term hazard if not handled properly. Please make sure the user is aware of the correct, safe procedure prior to use.

Please ask our professionals for advice on how to handle the fiber properly before the first use.

Protective grease inside cables causing trouble

The protective grease that is being used commonly in direct buried cables, is the cause of most maintenance visits for fiber cleaving and splicing tools.This grease should be removed with a proper solvent; not only using IPA (isopropyl alcohol), which in turn is suitable for cleaning the fibers for splicing after cleaving.

This protective grease forms a small layer on top of the coating and will be transferred on the v-grooves of both cleaver and splicer. Eventually, this layer of coating will accumulate and will lower tha accuracy of the splicer alignment procedure. Removing this grease layer with a proper solvent, has a great impact on maintenance frequency of splicers an cleavers.

For grease removal, we recommend using:

• Polywater Squeeky Kleen product: https://vesala.fi/product/polywater-squeekykleen-tc-35lfd/

Fiber Cleaver model for all Inno Instrument splicers

This model of cleaver an optional part for any splicer, here are our newest models from Inno Instrument:

• Inno Instrument M7
• Inno Instrument M9
• Inno Instrument View 6S

Please check availability 

Warranty related issues and maintenance available in our office in Nummela, Finland.

Fiber cleaver Inno Instrument V7/V7+

Fiber cleaver Inno Instrument V7/V7+ – Easy to use, traditional operation model

Fiber cleaver Inno Instrument V7/V7+ is a preceise fiber cleaver for cleaving a traditional 125 um fiber (both singe fiber and ribbon fiber applications). V7 (and it’s newer revision, V7+) includes a scrap collector mechanism and a container for collecting fiber cut-offs safely.

Fiber cleaver Inno Instrument V7/V7+ operation is 3-staged. First you insert fiber and attach it to the holder while closing the lid. Then, you press the rig with cleaver blade attached to it. This will cut the fiber. Lastly, open up the lid, which activates the mechanism for collecting fiber scarp into the container.

Fiber scrap safely into the scrap collector

Unit has an automated scrap collector that operates simulateously with the cleaving process. This mechanism will collect the potentially dangerous scrap pieces and secure them into the scrap contained, positioned in the side of the unit. Please note: user should empty this container after each usage, into a separate container with lockable lid. Fiber cut-off pieces can cause a long term hazard if not handled properly. Please make sure the user is aware of the correct, safe procedure prior to use.

Please ask our professionals for advice on how to handle the fiber properly before the first use.

Protective grease inside cables causing trouble

The protective grease that is being used commonly in direct buried cables, is the cause of most maintenance visits for fiber cleaving and splicing tools.This grease should be removed with a proper solvent; not only using IPA (isopropyl alcohol), which in turn is suitable for cleaning the fibers for splicing after cleaving.

This protective grease forms a small layer on top of the coating and will be transferred on the v-grooves of both cleaver and splicer. Eventually, this layer of coating will accumulate and will lower tha accuracy of the splicer alignment procedure. Removing this grease layer with a proper solvent, has a great impact on maintenance frequency of splicers an cleavers.

For grease removal, we recommend using:

• TL 3 Industrial solvent (by Solmaster), https://www.solmaster.fi/tuotteet/tl-3-teollisuusliuotin/

Default legacy models splicers, option for others

This model of cleaver is included by default e.g. into following splicer packages:

• Inno Instrument View 6S

This model can be chosen as an option for all of our splicer models.

More information on manufacturers website: https://www.innoinstrument.com/eng/v7/

Warranty and maintenance available in our office in Nummela, Finland.

Splicer electrodes, E-50

Inno Instrument View- and M-series splicers electrodes. Typical life span approx. 3500-5000 splices, depending on environmental factors and the cleanliness of fibers being spliced.

Fusion splicer M7

M7, an active clad-alignment splicer with ultra-portable design, is the most efficient fusion splicer in the market. This small but accurate fusion splicer inherits many remarkable functionalities from sister products.

M7’s 4.3 inch high-resolution color LCD touch screen with user-friendly intuitive GUI (Graphic User Interface) offers large and clear fiber images to users. Moreover, the adjustable strap hanger make users to customize M7 for their working condition.